乙二胺氯化铂(II), PT MIN

乙二胺氯化铂(II), PT MIN - Names and Identifiers

Name	Dichloro(ethylenediamine)platinum(II)
Synonyms	Enplatin NSC 125181 PLATINUM ETHYLENEDIAMINE DICHLORIDE Dichloro(1,2-ethanediamine)platinum Dichloro(1,2-diaminoethane)platinum Dichloro(ethylenediamine)platinum(II) DICHLORO(ETHYLENEDIAMINE)PLATINUM(II) DICHLORO(ETHYLENEDIAMINE)PLATINATE (II) cis-Dichloro (ethylenediaMine)platinuM(Ⅱ)
CAS	14096-51-6
EINECS	237-943-4

乙二胺氯化铂(II), PT MIN - Physico-chemical Properties

Molecular Formula	C2H6Cl2N2Pt
Molar Mass	324.07
Boling Point	-37.7°C
Water Solubility	Soluble in water.
Exposure Limit	ACGIH: TWA 0.002 mg/m3NIOSH: IDLH 4 mg/m3; TWA 0.002 mg/m3
Storage Condition	under inert gas (nitrogen or Argon) at 2-8°C
Sensitive	Hygroscopic
MDL	MFCD00000011
Physical and Chemical Properties	Ethylene Diamine platinum chloride also known as dichloroethylenediamine platinum, dichloroethylenediamine platinum, yellow needle-like crystals, insoluble in water, insoluble in ethanol, 1G can be dissolved in 115mL hot water. In excess of ammonia or excess ethylenediamine solution will occur complexation reaction to dissolve. It is commonly used in the industry as a catalyst precursor and also as a starting reactant for the addition of plating main salts and some platinum compounds as anticancer agents.

乙二胺氯化铂(II), PT MIN - Risk and Safety

Hazard Symbols	Xi - Irritant
Risk Codes	36/37/38 - Irritating to eyes, respiratory system and skin.
Safety Description	S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S37/39 - Wear suitable gloves and eye/face protection
WGK Germany	3
RTECS	TP2497100

乙二胺氯化铂(II), PT MIN - Introduction

Dichloro(ethylenediamine)platinum(II) is a chemical compound with the formula [PtCl2(C2H8N2)]. The following is a description of the properties, uses, preparation and safety information of the compound:

Nature:
-Appearance: Dichloro(ethylenediamine)platinum(II) is a white crystalline solid.
-Melting point: The melting point of the compound is about 210-212 degrees Celsius.
-Solubility: Dichloro(ethylenediamine)platinum(II) can be dissolved in water and organic solvents.

Use:
- Dichloro(ethylenediamine)platinum(II) are usually used as catalysts, especially in organic synthesis, such as hydrogenation reactions, selective oxidation, etc.
-The compound can also be used for the preparation of homogeneous catalysts, such as catalytic asymmetric reduction and asymmetric catalytic reactions in organic synthesis.

Preparation Method:
Dichloro(ethylenediamine) The preparation of platinum(II) can be carried out by the following steps:
1. Ethylenediamine is reacted with platinum (II) chloride. The reaction can be carried out at room temperature, and the reaction rate is accelerated by heating.
2. Filtration afforded crystalline product of Dichloro(ethylenediamine)platinum(II).
3. can be purified by recrystallization to improve the purity.

Safety Information:
- Dichloro(ethylenediamine)platinum(II) is relatively stable under normal conditions, but may decompose at high temperatures or when in contact with oxidants, releasing toxic hydrogen chloride gas.
-This compound is a hazardous substance and should be avoided by inhalation, skin contact and ingestion. Wear appropriate protective equipment when working.
-When using and handling the Dichloro(ethylenediamine)platinum(II), strictly follow the safety operating procedures and store it in a closed container, away from heat and fire sources.

Please note that Dichloro(ethylenediamine)platinum(II) is a professional compound, and the operation should follow the laboratory's safe operation procedures and follow relevant regulations and guidelines.

Last Update：2024-04-10 22:29:15